Firmware for the HP Pro x2 612 G2 tablet, with Streep the platform name and 6050A2851001 the board, revision A01. The 6050Axxxxxxx numbering is used by Inventec for its HP designs. The 7.74 MB RAR should contain a full SPI flash image for programmer-based recovery when the device fails to boot. Confirm the board number and revision printed on the PCB, and back up the original chip first, since it stores serial and product data that a generic dump will overwrite.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (8)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 12 Nov 2019 | Open file on RM Schematics |
| @biosarchive | 27 Nov 2019 | Open file on RM Schematics |
| @laptexlaptopbios | 10 Jul 2020 | Open file on RM Schematics |
| @one5technology | 21 Nov 2020 | Open file on RM Schematics |
| @pepeelectronica | 23 Apr 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →