Main BIOS image labelled for the HP 430 G8, which by HP naming points to the ProBook 430 G8 notebook, stored as a raw 32 MB binary. The name identifies it as the main system flash rather than an EC or secondary chip, but gives no board number, BIOS version or ME status. A dump like this is written to the SPI flash with a programmer such as a CH341A when the original firmware is corrupted. Confirm the chip on the board is 256 Mbit, and save the original contents before erasing or writing anything.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @L9BCM2MdAgNjNDk1. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →