BIOS image for an HP 430 G8 laptop main board, labelled as repaired, a 32.0 MB BIN matching a 256 Mbit SPI flash chip. Repaired usually means the dump was corrected for a working state, but test before relying on it. It is written with a programmer like a CH341A to fix a no-boot or corrupted BIOS. Back up the original chip first, since it holds board-specific data like serial and UUID, and confirm the flash chip capacity is 32 MB.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @L9BCM2MdAgNjNDk1. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →