Alternate dump, flagged (1), of KB9012 EC firmware for the Compal LA-9315P board, with no model named. It is a 128 KB binary sized for the ENE controller's complete flash. A second copy helps when one image is suspect or when comparing versions taken from different units. Restoring EC code typically fixes no-power and charging problems. Confirm the LA-9315P number and revision on the PCB, back up the existing firmware, and flash with a dedicated KB9012 programmer, verifying after the write.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 8 Mar 2017 | Open file on RM Schematics |
| @canalesquematicos | 5 Jun 2021 | Open file on RM Schematics |
| @canalesquematicos | 5 Aug 2021 | Open file on RM Schematics |
| @uzb4422 | 17 Feb 2023 | Open file on RM Schematics |
| @uzb4422 | 18 Feb 2023 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →