Cleaned BIOS image for Compal laptop board LA-E141P, 16.0 MB in size, so it fits a 128 Mbit SPI flash. The clean tag usually means the image has been reset to a neutral state, typically with the ME region cleaned, so a board can boot after reflashing. Compal LA-numbers appear on the PCB silkscreen and must match exactly. Save the original chip contents first to keep the serial and other system data, then write and verify the image with an external programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @L9BCM2MdAgNjNDk1. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →