A 16 MB SPI flash image for the Compal LA-E141P motherboard, revision 1.0, dated 2016-11-08, with the Intel Management Engine region cleaned and reported as working. A cleaned ME region is handy when a board fails to start or misbehaves due to a corrupted ME. The image should match a 128 Mbit (16 MB) chip; write it with an SPI programmer after backing up the original dump, since serial and other board data may need to be transferred. Check the PCB says LA-E141P rev 1.0.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @schematiclaptopramkushwaha. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →