1 KB EEPROM dump for a Samsung SN2033 PLUS LCD monitor, taken from the part marked IC100 and labelled as fully working. Small serial EEPROMs like this usually store configuration and display data, and a corrupted chip can cause no picture or wrong settings. Write the file with a programmer that supports 24-series I2C EEPROMs, making sure the chip type and size match. Read the existing chip first and keep that copy, then compare the board layout so the image goes to the correct IC position.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 22 Feb 2017 | Open file on RM Schematics |
| @abgm_manutencao_bios | 8 Aug 2019 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →