Firmware dump for the Xerox XL775K LCD monitor, 128 KB in size and labelled as tested fully OK. At this capacity it is most likely the main controller or scaler flash image rather than the small settings EEPROM, which exists as a separate 2 KB file. Repair use involves programming the flash chip on the monitor mainboard with an external programmer when the unit fails to start, shows a blank screen or stays in standby. Verify the chip part number and size, and back up the existing contents before any write.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (12)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Jan 2017 | Open file on RM Schematics |
| @pepeelectronica | 20 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 26 Apr 2022 | Open file on RM Schematics |
| @biosbigarchives | 12 Oct 2022 | Open file on RM Schematics |
| @generalbios | 14 Sept 2023 | Open file on RM Schematics |
| @generalbios | 23 Sept 2023 | Open file on RM Schematics |
| @generalbios | 29 Sept 2023 | Open file on RM Schematics |
| @generalbios | 30 Sept 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @schematics_bios | 23 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 2 Aug 2026 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →