Raw 256 KB dump of the LG W1953SE monitor firmware taken from a W25X20 flash, a 2 Mbit Winbond SPI part. The image holds the scaler program on the main board. It helps restore units with no display, a blinking power light or failed start-up. Program it straight to the chip with an external programmer, either in circuit or desoldered, after saving the original data. Verify after writing and confirm the flash marking and board version match before using it.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 13 Mar 2017 | Open file on RM Schematics |
| @abgm_manutencao_bios | 10 Jul 2019 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →