BIOS dump for an N102SP board marked Eric-VE-R, stored as a 2.00 MB .bin file. The name states the flash chip as 25Q16BV, a 16 Mbit SPI part, which matches the image size, and marks the dump as ok, meaning it was reported working. Write it with an external programmer such as a CH341A after selecting the correct chip type in the software. Confirm the board marking matches, read and back up the existing chip, and verify the written content against the file afterward.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →