BIOS dump for an N102SP board, Eric-VE-R revision, taken from a Winbond 25Q16BV flash chip and marked ok, meaning it was reported as working. The file is 2.00 MB, matching the 16 Mbit capacity of that chip. Use it to restore a board that has lost its firmware or fails to start after a bad update. Confirm the PCB silkscreen shows the same board name and revision, read the existing chip before erasing, and verify the written data with the programmer software afterwards.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →