Firmware dump for the Samsung NP300E4X notebook, board project Scala3-14CRV, as a raw 8.00 MB BIN file matching an 8 MB SPI flash. Use it to revive a laptop stuck without display or with a corrupted BIOS by programming the chip with a CH341A or similar tool. Back up the original contents first, check that your chip is 8 MB, and confirm the Scala3-14 project marking on the motherboard, since Samsung models of this series used several board variants.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @BiosSchematicWorld. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →