Samsung NP300E4X BIOS dump for the Scala3-14CRV mainboard, delivered as an 8 MB raw binary image. Samsung uses Scala platform names on its 300-series consumer boards, and the code is usually silkscreened on the PCB, so check it there before flashing. A technician writes such a file to the SPI flash chip with an external programmer when the laptop shows no POST or a corrupted firmware. Always dump and keep the original chip contents first, and confirm the chip is 8 MB so the image fits without truncation.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @BiosSchematicWorld. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →