Full flash dump for the Star X 31000 Plus Full HD receiver, read from a W25Q64 chip, a Winbond 64 Mbit (8 MB) SPI flash that matches the 8.00 MB file. The raw bin format means it is written with an SPI programmer, in-circuit with a test clip or with the chip desoldered. Typical use is recovering a receiver with corrupted firmware, a boot loop or no picture after a failed update. Confirm the model and chip marking, and save the original contents before programming so you can revert.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →