Scaler firmware for the W2052TQ monitor, W2x52TQ family, for an MST controller, version V240 with code 2795, dated 080922. The 256 KB raw file matches a 2 Mbit SPI flash used on this type of main board. Technicians program it to recover a display that is dead, stuck in standby or showing noise after firmware corruption. Several W2x52TQ images use different scalers, so confirm the chip on the board is an MST part and keep the original dump before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 28 Jun 2017 | Open file on RM Schematics |
| @abgm_manutencao_bios | 9 Aug 2019 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →