Firmware for the Computro board 6050A2945601 MB A01 (A1), an Inventec-style number, set up for onboard graphics, with 32 MB mentioned and an OK status in the name. Delivered as an 11.6 MB RAR archive. Use it to recover a board with damaged firmware by writing the SPI flash with an external programmer. The 32 MB figure most likely refers to flash or image size, so compare it to the installed chip. Back up the original, and confirm the board number and A01 revision on the PCB first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 5 Feb 2024 | Open file on RM Schematics |
| @generalbios | 7 Feb 2024 | Open file on RM Schematics |
| @generalbios | 11 Feb 2024 | Open file on RM Schematics |
| @generalbios | 6 Mar 2024 | Open file on RM Schematics |
| @generalbios | 14 Jul 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →