Flash dump for the Star X X1 receiver, with the name pointing to an HNT260 S1 C board and a W25Q32 flash chip. The 4.00 MB size matches that 32 Mbit Winbond part. Such a file is programmed onto the SPI memory to bring a dead or boot-looping receiver back to life when on-screen or USB updates are no longer possible. Compare the board marking HNT260 S1 C against the PCB before writing, back up the current chip contents, and verify the written data after programming to rule out a bad contact.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →