STAR X X2 HNT260 S1 C W25 Q32 S mk

BIOS .bin 4.00 MB Shared

SPI flash dump for a Star X X2 receiver; the name also includes HNT260 S1 C, probably a board marking, and a Winbond W25Q32 chip written with spaces. The S and mk letters are not explained. The 4 MB size matches the full 32 Mbit memory. Check the HNT260 marking on your main board before writing, since similar models may use other boards. Program the image with a clip and programmer, verify the write afterwards, and keep a backup of the original chip in case you need to roll back.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files