Complete SPI dump for a Star X X1 satellite box, naming the HNT260 S1 C board and a Winbond W25Q32 flash. The file size of 4.00 MB is exactly 32 Mbit, so it suits that chip. Technicians program such images to repair bricked receivers, boot loops or a blank display after a failed software change. Clip or desolder the flash, make a backup read, then write and verify. Confirm the HNT260 S1 C marking on the PCB, since a dump from another board can leave the box dead.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →